Though commonly called “Steam Cleaning”, no actual steam is involved in the HWE cleaning process, apart from steam that may escape incidentally from hot water. When the cleaning solution comes in contact with the carpet/tile/rug, it is anywhere between 50-120 degrees Celsius, according to the heat available from the cleaning unit. For instance, in a modern truck-mounted carpet and tile cleaning machine, water can be heated to 150+ degrees Celsius, but after passing through high pressure steel braided hose and several manifolds, the water loses much of its heat.
The typical cleaning method involves a preconditioning of the soiled surface with an alkaline(7 or above on the pH Scale) agent, followed by light agitation with a grooming brush and appropriate dwell time. Next, the surface is passed over several times with a cleaning tool (either manual or automatic) to thoroughly rinse out the preconditioner and, using an acetic acid solution, lower the pH of the fibres to a neutral state. Finally, the surface is dried sufficiently to avoid any possibility of saturation.